B.M.W.

D, 1928 to date

(1) Bayerische Motoren-Werke, Eisenach, Munich, 1928 – 1939

(2) Bayerische Motoren-Werke AG, Munich, 1952 to date

The BMW firm developed from the Bayerische Flugzeug-Werke, Munich founded in 1916 for the production of aero engines. In 1922 the name was changed to Bayerische Motoren-Werke, and production of engines for boats, lorries and motor cycles began. In 1923 the first BMW motor cycle appeared. In 1928 the Eisenach Dixi works were acquired and car production began with the BMW-Dixi, an Austin Seven built under license. BMW car production was carried on in Eisenach, while production of BMW motorcycles remained in Munich. The BMW-Dixi was succeeded in 1932 by the 800cc BMW 3/20ps model with tubular backbone chassis and independent suspension.

In 1933 came the first 6-cylinder model, the BMW 303 for sale). The range of sixes continued with the ‘BMW 315’(1.490cc, 34 and 40bhp) and ‘BMW 319’ (1.911cc, 45 and 55bhp). The triple-carburettor sports versions of these BMW cars laid the foundation for the famous BMW sports cars, noted for their speed and appearance. The engine of the ‘BMW 326’ (1971cc, 50bhp) became the basis for the ‘BMW 327’ and ‘BMW 328’. The BMW 327 used the 55bhp engine, while the most successful BMW 328 developed 80bhp. Two of this model’s most remarkable successes amongst many in races, rallies and trials were a class win at Le Mans and the winning of the 1940 abbreviated Mille Miglia. The ‘BMW 327/328’ used an 80bhp engine in the ‘BMW 327’ longer wheelbase chassis and was also very successful in competitions. The last pre-World War 2 model was the ‘BMW 335’ with a 3.485cc 90bhp engine. It was intended for the British market and only a few hundred BMW 335’s were built. From 1935 to 1939 BMW’s were imported into the United Kingdom and marketed under the name of Frazer Nash-BMW.

The Eisenach factory was lost through nationalization in 1945. Production of BMW motorcycles was taken up again in the Munich factory and facilities for BMW car production were prepared. The first Munich-built BMW car appeared in 1952, the ‘BMW 501’ with a 6-cylinder 1.971cc engine, based on the last pre-war designs. This started the range of 6- and 8-cylinder prestige BMW cars. The last of this range was the ‘BMW 3200’ CS 2-door coupé with 3.2-litre 160bhp engine for sale. In 1955 BMW started production of the Isetta bubble car under licence, and this was followed in 1957 by the BMW ‘600’ 4-seater based on it. In 1960 the ‘BMW 700’ appeared with a 697cc air-cooled opposed twin-cylinder engine mounted in the rear. In 1962 BMW began to produce medium sized cars again, bringing out the 4-cylinder ‘BMW 1500’ (80bhp), which was developed into the ‘BMW 1800’(90bhp). The ‘BMW 1800TI’ and the ‘BMW 1800 TI/SA’ were tuned versions developing 110 and 130bhp respectively. In 1965 the ‘BMW 2000 C’ (100bhp) and the ‘BMW 2000 TI’ (120bhp) coupés appeared. In 1966 the ‘BMW 1600’ (83bhp), the ‘BMW 2000’ (100bhp) and the ‘BMW 2000 TI’ (120bhp) with 4-cylinder in-line engines of 1573cc and 1990cc capacity were added to the range. In 1967 the Frazer Nash-BMW name was revived for a special luxury model of the ‘BMW 2000TI’, selling in England for £1830. New for 1968 were the BMW 2002 for sale, combining the 135bhp 2-litre engine with the BMW 1600 chassis, and the BMW 1600GT, which used the body of the former Glas 1700, a result of the BMW-Glas merger of 1967. In 1969 the BMW company produced their first six since 1958, the BMW 2500. Mechanically this derived from the existing fours, but was powered by a 170bhp 2494cc 7-bearing engine. A bigger 2.8-litre version was also available By 1971 BMW were offering a 2985cc version with either twin carburetors or Bosch fuel injection; in the latter form it gave 200bhp. Also new in 1971 was a semi-estate car, the Touring, available in 1600, 1800, or 2000 guise. BMW ran a Formula 2 team in 1969, using special 1.6-litre engines in British Lola chassis, but though there were several victories in 1970, the BMW company retired from his branch of the sport after two seasons. The 1973 range embraced the 1600, 1800, 2000, and the sixes, as well as a new ohc BMW 520 for sale with 1990c 4-cylinder engine, wishbone and trailing-link front suspension, and saloon bodywork in the 2500 idiom. Options included 115bhp twin-carburettor or 130bhp fuel-injection models, and a choice of 4- and 5-speed manual and automatic transmissions. A 200bhp derivative of this unit powered a prototype mid-engined coupé, the turbo, with all-disc brakes.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Citroën

France, 1919 to date

(1) SA André Citroën, Paris, 1919 – 1968

(2) Citroën A, Paris, 1968 to date

André Citroën, a former chief engineer of Mors, started his own gear-making firm in 1913, a fact commemorated by the ‘herring-bone bevel’ emblem used on all Citroën cars. He put his knowledge of American mass-production methods to good effect in 1919, when, in association with Jules Salomon (already responsible for Le Zèbre and later to be behind the Rosengart), he evolved two Citroën designs. The bigger of these, a sleeve-valve 4-litre, was taken over by Gabriel Voisin, but the 1.3-litre 4-cylinder Citroën Type-A was put into production in a factory previously used by Mors. This was a straightforward sv machine with disc wheels, cone clutch, fully electrical equipment, left hand drive and central change for the 3-speed gearbox. By the end of 1919 it was selling for 7950fr in France and £500 in England. 10.000 Citroën cars were made in 1921.    

The need for expansion was soon to lead to the acquisition of Clément-Bayard. At this time, Citroën was developing the half-track system evolved by M. Kégresse, former manager of Tsar Nicholas II’s garage. This was mainly applied to commercial and military vehicles, but the smaller Kégresse versions were adaptations of Citroën’s private-car chassis, and among their exploits was the first successful crossing of the Sahara by Citroën motor car in 1922 – 1923. The 1922 Citroën range included an improved Citroën Type-B of 1½-litres, and the 856cc Citroën 5CV with cloverleaf bodywork, detachable head, quarter-elliptic springing all round, a foot transmission brake and coil ignition. Though neither a brisk goer nor a brisk stopper, it was indestructible and remained in production until 1925, in which year Noel Westwood used on to drive all round Australia in a Citroën. 15.000 Citroëns had been sold by 1924, when 250 cars a day were being turned out and Opel were marketing what amounted to a copy of the Citroën 5CV under the name of Laubfrosch. 1925 saw the advent of cheap all-steel saloon bodies made under Budd patents; this angular tout acier model sold in England for £325, or only £100 more than the standard tourer. Though a modernized derivative of the Citroën 5CV was to reappear in 1929 as the Sima-Standard, Citroën themselves concentrated in 1926 on the Citroën 12hp type, now enlarged to over 1½-litres, and given a flat radiator, 4-wheel brakes, and semi-elliptic springs. Cars were lso being assembled outside France. The British factory at Slough was opened in 1926, and was followed by others in Italy and Germany. In 1934 Gräf u. Stift of Vienna also built cars under Citroën licence. Of these only Slough survived the 1930s, British built Citroëns continuing to appear until 1965. 

The Citroën company was now firmly established with Peugeot and Renault as one of France’s ‘big three’. In 1928 the saloons became more streamlined – they were also cheaper, the Citroën 12/24hp costing £220. Production in 1929 was 100.000 vehicles; new for that season was the 2.4-litre 6 cylinder Citroën C6, a conventional sv machine with 3-speed box, coil ignition, servo brakes and gravity feed. The 4-cylinder Citroën C4 cars were enlarged to 1.6 litres and had a similar specification. These two basic Citroën types were continued to 1932, when the company offered a new 1½-litre Citroën Ten among with the bigger Citroën Four and Citroën Six. These cars had low-pressure tyres, box-section frames, ‘Floating Power’ engine mountings under Chrysler licence and synchromesh gearboxes. The Citroën Ten cost £198 and the bigger cars were available in long-wheelbase form with seven-seater coachwork. Under the sponsorship of the Yacco Oil company the 10hp Citroën ‘Petite Rosalie’ successfully undertook a herculean programme of long-distance record work, in the course of which 187.500 miles were covered at 58mph and 128 International Class and 43 World Records were acquired. These Citroën models formed part of the range until 1936, acquiring four forward speeds in 1934, but they were overshadowed by yet another Citroën revolution, the first Citroën 7CV traction avant which appeared in that year. This had front-wheel drive, an ohv wet-liner engine, unitary construction of chassis and body, and all-round torsionbar independent suspension. The 3-speed synchromesh gearbox had dashboard change and production engines had a capacity of 1.6-litres. This design formed the backbone of Citroën’s range until 1955, and was not withdrawn until July 1957, by which time 708.339 4-cylinder Citroën traction-avant cars had been built and the car’s appeal was largely founded on its now ‘traditional’ styling.

A 3.8-litre fwd V8 was shown at the 1934 Paris Salon, but early the following year André Citroën found himself in serious financial difficulties and was forced to sell out to the Michelin interests. Meanwhile an alternative 1.9-litre engine had been applied to the Citroën traction avant and by mid-1935 three additional types were available: the Citroën 11 légère (Sports 12 or light 15) which shared a hull with the 7CV, and the Citroën 11 normale (Big 15), made in two wheelbase lengths, 10ft 1½in and 10ft 9in, the latter for seven-seaters. In 1936 Francois Lecot drove a Citroën 7CV 400.000 kilometers in 12 months. The 1937 fwd Citroëns had rack-and-pinion steering, rear-wheel drive cars were still made with the 11CV engine and (for a short while) the option of a diesel power unit. The 1939 range ws rounded out with a 2.9-litre 15CV 6-cylinder fwd car on regular lines, which sold in England for £328 and just before World War 2 downdraught carburetors were standardized. 1939 models of Georges Irat, Rosengart, and smaller Chenard-Walckers used 11CV mechanical components as a basis for their cars, to be followed in 1947 by D.B.

After the war the Citroën 7CV was dropped, but production of the other fwd models was resumed, cars for the French market being supplied only in matt black. In 1949, however, the fruits of ten years of experimentation were seen in another evolutionary Citroën, the Boulanger-designed Citroën 2CV. Like its bigger sisters, it had fwd and unitary construction, but it also had interlinked coil suspension, a 4-speed all-synchromesh and all-indirect gearbox with geared-up top and quick detachable bonnet, doors and front wings for easy maintenance. Power came from a 375cc 9bhp ohv flat-twin and the corrugated grey finish attracted unkind comparisons with garden sheds. Supply, however, never caught up with demand: Citroën production jumped from 48.177 in 1950 to 78.199 in 1951 as the Citroën 2CV got into its stride. 1955 cars had 425cc, 12bhp, and centrifugal clutches, and in 1958 came tous terrains model with twin engines and 4-wheel drive. The Slough factory offered the Bijou variants in 1960 with a fiberglass coupé body, but at £695 it was hardly competitive. By July, 1966, 2.574.642 2CVs had been sold.

The full-sized Citroën cars of 1953 came with built-out boots and heaters as standard equipment, and a year later the Citroën Six was available with self-levelling hydropneumatic suspension. This led to the Citroën DS19 introduced at the 1955 shows, on which the only old features were the fwd and the long-stroke 4-cylinder engine, now up-rated to 65bhp. The self-levelling suspension was joined by power assistance for the brakes (disc front and rum rear), steering and gear-change. There were 4 forward speeds, the roof section was of reinforced plastic, and the single-spoke steering wheel found on Humbers of half a century before was revived. It was expensive (£1726 in England) and complicated, and a year later a simplified Citroën ID19 version retained the advanced springing but eliminated the power assistance. It was £140 less than the DS in France and Citroën sales rose to 206.138 cars. 1954 had seen the first association between the company and Panhard, which was to lead to a full integration within the next decade, while Cooper in England used Citroën gearboxes on their racing cars from 1956 onward. A Citroën won the 1959 Monte Carlo Rally.

A development of the 2CV was the Citroën Ami-6 flat-twin of 1961, a curious-looking little 4-door saloon which took some time to find acceptance. In 1965 short-stroke engines were at long last adopted for the more expensive 4-cylinder cars, though it was not until 1967 that the basic 1934-1935 unit was dropped from the ID. The most expensive 1967 Citroën model was the 2.2-litre 108bhp Citroën DS21; it acquired a swiveling 4-headlamp installation in 1968 and could be had wih fuel injection in 1971. The Citroën Dyane of 1968 filled a gap in the range: it was a more refined 2CV available either with the latter’s uprated 435cc unit or with the 602cc Ami motor. An open jeep-type version, the Citroën Méhari, arrived a year later. But meanwhile during 1968 Citroën had acquired Italian affiliations, first entering into an agreement with Maserati and then negotiating (against General de Gaulle’s wishes) with Fiat. As a result the Italian giant acquired a 15 per cent stake in the Citroën company and their new French ally undertook the distribution of Autobianchi products in France. In 1969 there was an experimental batch of 500 M35 coupés using 49bhp Wankel engines in Ami-type structures, but a year later came the result of the Maserati alliance, in the shape of the Citroën SM sports coupé, powered by a 2.7-litre 4ohc V6 engine developing 170bhp. This, of course, drove the front wheels via a 5-speed all-synchromesh gearbox; other features were power steering and disc brakes, and a 6-headlamp layout. With a price of 51.800 francs and a top speed of 137mph it was the fastest and most expensive Citroën ever, and it helped boost the marque’s flagging reputation in rallies. Their only major performance (a near miss in the 1968 London-Sydney Marathon apart) had been a 1-2-3 victory in the 1969 Moroccan event, but the Citroën SM won again in Morocco in 1971.

For 1971 another gap was bridged with an answer to Peugeot and Renault: the 1015cc Citroën GS. This had an air-cooled ohv light-alloy flat-4 engine, and all-disc brakes, those at the front being inboard. A station wagon followed in 1972, when fully automatic gearboxes and fuel injection were available on the big 4-cylinder saloons, and the twins continued in Citroën 2CV Dyane, Méhari and Ami forms. Even more powerful DS Citroëns were offered in 1973, outputs of the new 2.3-litre engines being 115bhp in carburetor form, or 130bhp with fuel injection: the latter was standardized on the SM. At the same time the Citroën GS was made available with automatic transmission, and the option of a 1200cc engine. The 2-cylinder Citroën cars were ssembled or manufacturerd in eight countries, and Citroën D-series models produced in South-Africa and Yugoslavia. In the latter country Citroën cars are marketed under the Tomos name.

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@postwarclassic.com